How does Cunningham Penile Clamp work?
- Cunningham Clip is a hinged, stainless steel frame supporting two soft foam rubber pads and a locking device.
- The user is supposed to place the penis between the two foam pads and the hinged clamp is squeezed shut.
- Lower foam pad has an inverted V which presses against the lower side of the penis exerting a closing pressure on the urethra.
- A slight pressure on the urethral canal on the lower side of the penis prevents urine leakage.
- The required pressure is achieved by the hump in the under part of the clamp.
- For comfort and proper fit, upper part of the clamp can be easily shaped by the fingers.
- Cunningham Clamp should be replaced every 3 months, or sooner if the foam deteriorates.
Note:- This Product is Non Returnable
Cunningham Penile Incontinence Clamp Sizing Guide
Cunningham Penile Clamp sizes include: large, regular, or juvenile. To find the correct size, The user will need to measure the area around the shaft of penis while compressing it slightly. To do this, gently compress the middle of shaft with thumb and forefinger. Apply slight pressure as if stopping the flow of urine. Then, measure the area around shaft using a tape measure.
- If the shaft is 3 inches, the user will need the large clamp.
- If the shaft is 2 inches, the user will need the regular clamp.
- If the shaft is 1½ inches, the user will need the juvenile clamp.
What to buy with Bard Cunningham Penile Clamp
How to use Cunningham Penile Clamp?
- Tighten the clamp to compress urethra. The large and regular clamps each have 5 settings that adjust the pressure on urethra. Use the ratchet catch to adjust the pressure. To release the catch, press inward on both of the spring wire loops. The juvenile clamp is not adjustable.
- Shape the upper foam pad with our fingers to help it fit better and feel more comfortable.
- To urinate, release clamp.
- After finished urinating, put clamp back on to prevent dribbling. If possible, place the clamp on a slightly different part of shaft.
Important tips for using Cunningham Clamp
- Release Bard Cunningham Penile Clip every 1 to 2 hours to allow urine to flow out. This is important in order to avoid urinary tract infections.
- Every 2 hours, move the clamp up or down shaft. Do not keep it clamped for more than 2 hours in the same place.
- Do not use the clamp at night while sleeping. Use adult urinary pads for leakage.
- Make sure that clamp is not set too tightly on penis. This will help maintain blood circulation and prevent skin irritation. It is important that to have proper sensation in penis so that the user can feel anything that is painful or irritating.
- After repeated usage and proper maintenance, inspect the product for signs of deterioration or damage like cracking, discoloration or separation of foam.
- Caution Federal (U.S.A.) law restricts this device to sale by or on the order of a physician.
- Cunningham Clamp for urinary incontinence contains natural rubber latex which may cause allergic reactions.
How to clean Bard Cunningham Bard Clamp?
- Hand wash clamp in a sink with mild soap and warm water. Do not use bleach, detergent, or hot water on clamp.
- Rinse it thoroughly in cool, clean water.
- Gently squeeze the foam to get rid of excess water.
- Let clamp dry in a cool place away from excess heat or direct sunlight. Do not put it in the washer or dryer or use a blow dryer on it.
