Bard Magic3 Hydrophilic Male Intermittent Catheter with Sure-Grip

How To Prepare Magic3 Hydrophilic Intermittent Catheter?

• Wash your Hands Thoroughly with Soap and Water.
• Break the Water Packet by applying pressure to the foil packet to release the water (Hint: fold the water packet prior to applying pressure to ease release).
• Ensure all water is released from the foil packet.
• Wet the Catheter by holding the package with the printed side up and tipping the package end-to-end three to six times. This movement is required so that the water transfers back and forth over the catheter to fully wet the hydrophilic coating.
• Peel Open the Package at the funnel end to expose approximately 4” of the catheter. Do not remove the catheter yet.
• For convenience use the adhesive tab at the funnel end of the package to stick the package to a nearby dry vertical surface while preparing to catheterize.

How To Catheterize Using Magic3 Intermittent Catheter?

• Prepare Your Magic3 Hydrophilic Catheter for Use.
• Thoroughly wash area around meatus before catheterizing.
• Wash your Hands Thoroughly.
• Hold the Sure-Grip Sleeve with your dominant hand and squeeze it to hold the catheter shaft as you remove the catheter from the pack.
• Next, hold the catheter funnel above the Sure-Grip Sleeve with your other hand and slide the Sure-Grip Sleeve down the shaft, stopping at around 6” from the tip. Release the funnel.
• While gripping the catheter with the Sure-Grip Sleeve, gently pass the tip of the catheter into your urethra until the Sure-Grip Sleeve nears the meatus. If there is no urine flow, loosen the tension on the Sure-Grip Sleeve to allow it to slide back towards the funnel end. Re-grip the Sure-Grip Sleeve and continue to insert the catheter into the urethra. Repeat until urine starts to flow.
• Hold the funnel end and remove the catheter from the packaging.
• Gently pass the tip of the catheter into your urethra and advance the catheter until urine starts to flow.
• As soon as urine starts to flow, point the catheter towards the toilet or other collection device. Try to keep the catheter steady until urine stops flowing.
• When urine stops flowing, slowly withdraw the catheter, stopping if flow starts again until the last few drops have drained.
• Finish by disposing of the catheter and its packaging. Wash your hands with soap and water.

Specification

Customer Reviews